Robert Adams's Induction Motor Generator: The Free Energy of the 1970s
The Adams motor is similar to a brushless DC induction motor but integrates a secondary winding to harness electricity, providing output voltage in pulse form. The short pulses are then charged and converted depending on the intended use. Essentially, the output energy is greater than the input energy (in terms of electricity or power).
Basic Information about the Robert Adams Generator
The Adams engine is a type of electric motor invented by New Zealand engineer Robert Adams in the 1970s. The Adams engine is sometimes called a "vacuum-powered" engine because it uses electromagnetic principles to extract energy from the environment.
This motor is based on a unique design that uses a series of rotating and static electromagnetic fields to generate torque that can be used to power mechanical devices. One of the main features of the Adams motor is that it uses permanent magnets combined with electromagnets to create a rotating magnetic field.
Adams claimed that his engine was capable of generating more power than it consumed, making it a potentially revolutionary technology. However, claims of unity or generating more energy than put into the system have not been confirmed by the scientific community, and the Adams engine remains a controversial topic in the alternative energy field.
Engine Told by Engineer (Like a Legend):
"My father, an electronics engineer, went to the Hummingbird engine demonstration (in 1996, IIRC). It used the same principle, but instead of generating electricity, the goal was horsepower.
He used his own testing equipment to verify everything. The demonstration used 460 watts of power and produced 3 horsepower (2268W), or 5 watts of horsepower per watt of electricity; the remaining 4 watts are provided by permanent magnets."
Circuit Diagram:
Explanation of Electrical Circuit Diagram:
In essence, this is the method of exploiting the power of voltage transients that Charles Proteus Steinmetz used to decode Ether technology.
This voltage is created due to a sudden open circuit in the coil, with the voltage value increasing extremely high, and the voltage value being opposite to the original voltage.
For example, initially, I have an alternating current voltage of 10V at coil L in a closed circuit state. This voltage increases from 0 to 10V (maximum value) and will decrease from 10V to 0V.
But when the voltage is at 10V, the circuit suddenly becomes open, and the coil will have a reverse voltage that suddenly increases to hundreds of volts (about 100V to 200V). The voltage graph is the opposite of the original 10V voltage; in pulse form, the graph is the opposite, with a voltage amplitude of hundreds of volts in a very short time.
This reverse pulse does not prevent the magnet from rotating; on the contrary, it promotes the magnet on the rotor to rotate faster.
This is the basis of Free Energy, which is based on Ether tension creating voltage transients.
[ See full information and instructions for creating the Robert Adams generator: https://ultimate-energizer-guide.blogspot.com/p/the-adams-motorgenerator.html ]
Here's another explanation from a free energy expert:
The system so far produces a spinning rotor for very little current draw from the battery. But we want the system to provide us with excess electrical output, so for that, four additional electromagnets are added around the rotor. These output coils are mounted on a non-magnetic disc which can be rotated to adjust the gap between the drive coils and the output coils. Like the rotor magnets, the output coils are spaced evenly around the circumference of the rotor at 90-degree intervals
Surprisingly, the output coils are switched Off for most of the time. This sounds mad but it most definitely isn’t mad. With the output coils disconnected, the approaching rotor magnets generate a voltage in the output coil windings but no current can flow. As no current is flowing, no magnetic field is generated and so the rotor magnets just pull directly towards the output coil iron cores. The maximum output coil voltage is when the rotor magnets are aligned with the output coil cores. At that instant the output switch is closed and a strong pulse of current is drawn off and then the switch is opened again, cutting off the output current. The output switch is closed for only three degrees or so of the rotor’s rotation and it is off again for the next eighty seven degrees, but the opening of the switch has a major effect. The switch being opened cuts off the current flowing in the output coils and that causes a major reverse voltage spike causing a major magnetic field which pushes the rotor on its way. That voltage spike is rectified and passed back to the battery. [ Source: https://ultimate-energizer-guide.blogspot.com/p/the-adams-motorgenerator.html ]
Similar Solution with Technology Lost for Hundreds of Years:
We introduce a method for exploiting electrical transients (transient voltages) from native Ether technology.
In fact, Charles Proteus Steinmetz is a mathematical and electrical physics genius hired to decode Nikola Tesla's patents and Ether physics. Steinmetz is even more highly regarded than Nikola Tesla in applied mathematics from physics.
This is the technology to exploit the power of Ether electromagnetic transients based on Tesla's technology:
Revealed At Last:
▶️ Ancient Invention Generates Energy-On-Demand
🔹 Version from Nikola Tesla's Magnifying Transmitter
🔹 The "tension" for "electricity fractionation" to occur is the Earth's Potential Potential. To be precise, it is the tension of the Ether, and the electricity is the dynamic polarization of the Ether.
🔹 During "Electricity segment", the magnetic field collapses several times in short periods of time. That leads the voltage V = Φ/t to reach i**nfinity **(V → ∞) when t → 0
V - The electromotive force which results from the production or consumption of the total magnetic induction Φ (Phi). The unit is the “Volt”. Where t is the time of magnetic field collapse from maximum to complete collapse.
Research scholars also call it Tesla's technology called Radiant Energy from Electronic Circuits, Impulse Technology.
🔹 There are also many other plans to create free energy generators including Self Powered AC Generator.
