Electricity Saving Box
So, let's address the question: Does the Electricity Saving Box work? What is its real principle? And why is it sometimes called a scam, even if it might actually work?
Image source: Magicel King Super MAXX Electricity Power Saver Heavy Duty
After researching the Electricity Saving Box, I identified two basic points:
It is plugged into the socket as an electricity-consuming device. This means that the Electricity Saving Box is connected in parallel with other consuming devices in the house. When a device is connected in parallel to the power source, the system can still function if a diode is added to prevent unwanted current from flowing back into the source. Additionally, a new source added in parallel can receive current from another source (similar to charging), thanks to diodes and electronic components such as MOSFETs, resistors, etc.
Inside the box are coils and complex electronic components. I'll leave it at that because revealing too much might affect their business. I don’t want to dispute their interests or violate their copyright.
Essentially, it’s just an electronic circuit designed to process the grid power source (220V/110V; AC 50Hz/60Hz).
Therefore, in principle, if the electronic circuit can generate free energy—meaning the efficiency is greater than 1, where the output energy exceeds the input energy—then the Electricity Saving Box would indeed be effective.
However, most electrical engineers and scientists are not trained in Ether electrical physics, so they may not fully understand the concept of "Electricity" from this perspective. Some, after revisiting the works of electrical pioneers like Nikola Tesla, Charles Proteus Steinmetz, Joseph John Thomson, and others, come to understand this better. This is often discussed enthusiastically on free energy forums.
Nevertheless, within the academic world, these professionals still have to adhere to the consensus that Overunity or Free Energy does not exist.
That’s why, when you search online, you’ll find two conflicting opinions about whether the Electricity Saving Box works. Some say, "No, it can't work; this goes against the laws of thermodynamics." Others claim, "Yes, it does save electricity for your household."
Basic Principle of the Electricity Saving Box
I am not part of the group that created the Electricity Saving Box, but even so, I cannot reveal all their secrets, as it would impact their business.
While my article may not have a significant impact, there are spies on the internet who might see it, hire people to develop similar products, and attempt to overthrow the business power of the original creators.
Electronic Components on the Circuit Board + "Eternal Light" Circuit (Joule Thief)
You can see that the Joule Thief circuit plays a role in the Electricity Saving Box, functioning similarly to a self-recharging flashlight. I have analyzed this in detail in the article "Free Energy from Ether: Eternal Light (flashlight) by Joule Thief Circuit."
However, implementing this circuit to supply a high-power consumption load system is not simple. The energy saver itself uses electronic components to achieve this, helping to reduce the electricity bill by 35% to 50%. In fact, they could do even better, reducing the electricity bill by more than 50%. But if they did too well, the electricity companies would come after them, and they would likely be sued. Do you think the judges in court understand the physics of Ether electricity to make a fair judgment? Probably not! So, it wouldn’t be fair.
It is a type of energy saving box but is actually a power source supplied from an electronic circuit with surplus energy (Overunity). And here is a practical device that follows the principle presented above:
See this electricity saving box in the selection list: Top Electricity Saving Box - Top Energy Saving
Another type: Using special capacitors combined with electronic circuits.
In addition to the type with the power mentioned above, there is also a popular, cheap type on the market. There is no commitment or guarantee for these types. Some say it works, others say it doesn't. It depends on whether their consumption device is compatible with that special capacitor, and above all, whether the "special capacitor" inside is good or not.
Conventional electrical theory cannot explain why the meter reading drops. Only the Ether theory can explain the correct electric current. According to it, there are no Electrons oscillating or moving in the metal of the conductor. In fact, the "Special Capacitor" has reduced the number of electric lines of force on the wire from the meter to the load. You can see the picture below:
This simple type has a mysterious "black box", using a meter it looks like a capacitor, but when removed by sawing, cutting and peeling it apart, it is found to have a special structure.
See details of disassembling this black box: The mysterious black box of the Power Saving Box device
Why is the Energy Saver Considered a Scam, Even Though it Works?
As I’ve analyzed, these devices trick the electricity companies by presenting themselves as devices that optimize the transmission of electricity, increase power efficiency, and so on. There are plenty of reasons given, but no experimental proof.
Moreover, some websites, relying on common electrical knowledge, conclude that the device is a scam. This is because the theories taught in schools after 1930 are the consensus electrical knowledge accepted by the scientific community. These theories are enforced by the powers that be.
As a result, physicists tend to avoid discussing electricity, and since 1930, there have been no major inventions in the field of electricity. Although technologies have developed, they are still based on old theories, disguised as new ones.
Conclusion and Evaluation of Energy Saving Boxes
There are many types of Energy Saving Boxes on the market. However, the quality of these devices largely depends on the electronic circuit inside and the quality of the electronic components used.
Manufacturers will never create a device that can last 5 to 20 years while still functioning well because then they wouldn’t be able to sell replacements.
Typically, you might use it for a few months before needing to buy a new one to plug in as a secondary source.
The Energy Saver Box functions like a parallel secondary source and will prioritize electrical devices that consume a lot of power. This is because it generates a form of electricity called “Cold Electricity,” which is mixed with alternating current (AC).
Some Types of Electricity Saving Box for You to Choose from:
On the US Online Market: Electricity saving box
On the Chinese Online Market: Electricity Saving Box + Power Saver Energy | OR: electricity saving box
If you’re interested in using this technology as a generator with a large number of turns to become completely independent of electricity, I introduce a blueprint to create such a generator:
▶️ Ancient Invention Generates Energy-On-Demand
It’s a blueprint based on improvements to the Joule Thief circuit combined with Nikola Tesla's technology. You can see the review here:
Secrets of Complete Ultimate Energizer Guide | Why is it related to Nikola Tesla's technology?
It's Even More Practical Than It Seemed 70 Years Ago…
🔻 And for the first time in human history, ordinary folks can finally power up anything they need with renewable electricity...while investing a fraction of what the inventor ever thought was possible.
💠 Revealed At Last:
👉 Ancient Invention Generates Energy-On-Demand
